0.50 mm Pitch, 24-Position ZIF Flip-Lock
Mated stack height is 1.80 mm above the board — this sets the clearance under the FFC bend radius. The right-angle exit routes the cable along the board edge, which suits space-constrained layouts where vertical connectors would interfere with a cover or adjacent module.
Peer Comparison: Top vs Bottom Contact, Tin vs Gold
The SFV24R-2STE1HLF uses top-side contacts and a flip lock with tin plating. For applications needing higher mating-cycle life or a different cable end, the SFV24R-2STBE1HLF swaps tin for gold contacts and the flip lock for a slide lock, and accepts both 0.30 mm and 0.33 mm FFC with a straight, tapered cable end — a better fit for field-service or multi-cable builds.