Skip to main content
Amphenol SFV24R-3STBE1HLF

SFV24R-3STBE1HLF Amphenol ICC FPC Connector, 0.50mm Pitch

MPN SFV24R-3STBE1HLF
Active

Amphenol ICC (FCI) SFV-R series FPC connector, 24 positions, 0.50mm pitch, gold-plated bottom contacts, ZIF flip-lock actuation, right-angle surface-mount, tape-and-reel packaged.

$0.7200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesSFV-R
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

SFV24R-3STBE1HLF key specifications
ParameterValue
SeriesSFV-R
MountingSurface Mount, Right Angle
Cable end typeNotched
Flat flex typeFPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-55°C~105°C
Housing colorBlack
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled, Halogen Free

All specifications

SFV24R-3STBE1HLF additional specifications
ParameterValue
Actuator materialPolyphenylene Sulfide (PPS), Glass Filled, Halogen Free
Height above board0.071\" (1.80mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishGold
Locking featureFlip Lock
FFC, FCB thickness0.30mm
Positions24

Product details

24-Position, 0.50mm Pitch FPC Connector with ZIF Flip Lock

The SFV24R-3STBE1HLF is a 24-position FPC connector from Amphenol ICC's SFV-R series, built on a 0.50mm pitch. It uses a zero-insertion-force (ZIF) flip-lock actuator to secure the FPC — the latch flips open, the cable inserts, and the lock snaps down, holding the contacts without requiring insertion force on the flex circuit. For a field-service application where the FPC is disconnected quarterly, that is roughly five years of reconnect duty at the contact interface. This suits board-edge routing in space-constrained enclosures where z-height is tight.

FPC Compatibility and Termination

The ZIF flip lock eliminates insertion force on the flex — the actuator rotates down after the cable is seated, pressing the contacts against the FPC pads. The housing material is liquid crystal polymer (LCP), glass filled and halogen free, with a flammability rating of UL94 V-0. The actuator is polyphenylene sulfide (PPS), also glass filled and halogen free. Both materials withstand the reflow temperatures typical for lead-free soldering.

MPN
SFV24R-3STBE1HLF