Amphenol ICC (FCI) SFV-R series, 28-position, 0.50mm pitch, top-contact FFC/FPC connector, ZIF slide lock, tin-plated phosphor bronze contacts, 0.5 A, 50 V, surface-mount right-angle, solder retention, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | SFV-R |
| Mounting | Surface Mount, Right Angle |
| Cable end type | Straight, Tapered |
| Flat flex type | FFC, FPC |
| Connector (Contact type) | Contacts, Top |
| Voltage rating | 50V |
| Current rating | 0.5A |
| Operating temperature | -55°C~105°C |
| Housing color | Black |
| Actuator color | Black |
| Contact material | Phosphor Bronze |
| Housing material | Liquid Crystal Polymer (LCP), Glass Filled, Halogen Free |
| Parameter | Value |
|---|---|
| Actuator material | Polyphenylene Sulfide (PPS), Glass Filled, Halogen Free |
| Height above board | 0.071\" (1.80mm) |
| Material flammability rating | UL94 V-0 |
| Pitch | 0.020\" (0.50mm) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Solder Retention, Zero Insertion Force (ZIF) |
| Termination | Solder |
| Mating cycles | 20 |
| Contact finish | Tin |
| Locking feature | Slide Lock |
| FFC, FCB thickness | 0.30mm, 0.33mm |
| Positions | 28 |
The 1.80 mm height above board keeps the connector low-profile, useful for stacked board assemblies.
The tin contact finish on phosphor bronze is adequate for the rated cycle count; tin is cost-effective but frets under repeated insertion, so the cycle limit is a hard ceiling. In a production environment where the FFC is inserted once and the connector is never unmated, 20 cycles is more than enough.
Submit an RFQ for current pricing and lead time — availability is confirmed at quote time, not on a stock-holding basis.
The SFV28R-1STE9HLF is a direct sibling — same pitch, position count, and ZIF slide lock, but with bottom-contact instead of top-contact. If your PCB layout requires the contact side to face down, that part is the swap. The SFV25R-2STE9HLF is a 25-position version for fewer signals.