What This 10-Position ZIF Connector Does in the Assembly
The SFW10R-1STE9LF: The ZIF mechanism lets you insert the cable without force — the slide lock then clamps the contacts against the FPC pads, holding them in place against vibration and cable tug. It accepts FPC thicknesses of 0.30 mm and 0.33 mm, with either straight or tapered cable ends. The housing is brown PPS (UL94 V-0), the actuator is black PPS — both glass-filled for dimensional stability through reflow.
Position Count and Current: 10 Circuits at 1 A Each
With 10 positions and a 1 A per-contact rating, this connector handles low-power signal lines and modest power distribution. The 1.00 mm pitch limits the current ceiling more than the contact itself — the narrow trace spacing on the board and cable is the real bottleneck. If your BOM needs 12 circuits, that's the one; if you're at 10, this saves one position of board space.
ZIF Slide Lock: One Motion to Seat and Lock
The slide lock is the primary retention feature — push it forward after inserting the FPC, and it clamps the contacts onto the pads. There's no secondary TPA or latch; the slide lock alone holds the cable against vibration and light pull. In a board that sees occasional handling, it's enough. The mated height above board is 0.106" (2.70 mm) — tight enough for slim enclosures but still leaves room for the cable bend radius.
Sourced through independent distribution channels. No immediate supply constraints reported.