10-Position 1 mm Pitch ZIF — What It Fits
That cycle count suits a one-time build or infrequent service; the current rating is for signal-level loads, not power. The vertical orientation and 5.30 mm height above board mean the FFC enters perpendicular to the PCB — a common layout for board-edge interconnects where the cable runs away from the board surface.
Tin Contacts, 20 Mating Cycles — Where It Works
Tin plating on the contact face is the standard choice for low-cycle, low-cost interconnects. The 20-cycle rating means this connector is designed to be mated once or a few times over its life — typical in a production harness that ships as a mated assembly, not a field-service or test-point connector. The actuator is also glass-filled thermoplastic. The cable end type can be straight or tapered — both are common for standard flat flex cables.
RoHS compliant per.