Skip to main content
Log in
SFW12S-2STE1LF — Amphenol product photo
Amphenol

SFW12S-2STE1LF Amphenol ICC (FCI) FFC FPC Connector 12 Pos

MPNSFW12S-2STE1LF
Active

Amphenol ICC (FCI) SFW series, FFC/FPC connector, 12 positions, 0.039" (1.00 mm) pitch, Zero Insertion Force (ZIF), vertical SMD, tin-plated phosphor bronze contacts, 1 A, 100 V, UL94 V-0 housing.

$0.6500Ref. price · indicative, final on quote
SFW12S-2STE1LF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

SFW12S-2STE1LF Technical Specifications
ParameterValue
SeriesSFW
Mounting typeSurface Mount
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Vertical - 1 Sided
Voltage rating100V
Current rating1A
Operating temperature-55°C~105°C
Housing colorBrown
Contact materialPhosphor Bronze
Housing materialThermoplastic, Glass Filled
Actuator materialThermoplastic, Glass Filled
Height above board0.209\" (5.30mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesZero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishTin
FFC, FCB thickness0.33mm
Positions12

Product details

ZIF Actuation and Cable Fit

The ZIF mechanism accepts FPC or FFC up to 0.33 mm thick. The actuator is glass-filled thermoplastic (UL94 V-0), same as the brown housing. The vertical contact style mates with a single-sided FPC — the contact fingers land on one side only. The 1.00 mm pitch is standard for 1 mm FFC cable; the 12-position count matches a 12-conductor cable.

SMD Footprint and Board Layout

Surface-mount termination with solder pads — the connector stands 5.30 mm above the board. The ZIF actuator is on the top side, so the cable enters from above. No board locks — the SMD solder joints handle the retention for a cable that sees infrequent disconnect.

Frequently asked questions

What is the pitch of SFW12S-2STE1LF?

The pitch is 0.039" (1.00 mm). This is the centre-to-centre spacing of the contacts and sets the FPC cable pitch requirement.

Is SFW12S-2STE1LF RoHS compliant?

Yes, it is RoHS compliant per the manufacturer's listing.

What is the mating cycle rating?

Rated for 20 mating cycles minimum. This is typical for tin-plated contacts in a ZIF connector — suitable for infrequent rework or field service, not daily disconnect.

Can I use 1 mm pitch FFC cable with this connector?

Yes, the 1.00 mm pitch matches standard 1 mm FFC cable. The connector accepts FPC or FFC up to 0.33 mm thick.