Skip to main content
Log in
SFW18R-1STE1LF — Amphenol product photo
Amphenol

SFW18R-1STE1LF FFC/FPC Connector – 18 Pos, 1.00mm Pitch, ZIF

MPNSFW18R-1STE1LF
Active

Amphenol ICC (FCI) SFW-R series, 18-position, 1.00mm pitch, bottom-contact FFC/FPC connector, ZIF slide lock, tin-plated phosphor bronze contacts, surface-mount right-angle, tape and reel.

$0.9500Ref. price · indicative, final on quote
SFW18R-1STE1LF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

SFW18R-1STE1LF Technical Specifications
ParameterValue
SeriesSFW-R
Mounting typeSurface Mount, Right Angle
Cable end typeStraight, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating100V
Current rating1A
Operating temperature-55°C~105°C
Housing colorBrown
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialPolyphenylene Sulfide (PPS), Glass Filled
Actuator materialPolyphenylene Sulfide (PPS), Glass Filled
Height above board0.106\" (2.70mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishTin
Locking featureSlide Lock
FFC, FCB thickness0.30mm, 0.33mm
Positions18

Product details

18-Position, 1.00mm Pitch ZIF Connector – Active Production

Board Fit and Routing – Right-Angle, Bottom Contact

This is a right-angle surface-mount connector with bottom contacts — the FFC/FPC inserts from the top and contacts the pads on the bottom side of the connector body.

The ZIF mechanism means no insertion force on the contacts — the slide lock clamps the cable after insertion.

Position Count vs. Peer SFW18R-2STE1LF

The SFW18R-2STE1LF shares the same 18 positions, 1.00mm pitch, and 0.106" height, but uses top contacts instead of bottom contacts. If your FPC pad layout is on the top side of the board, the -2STE1LF is the matching half — otherwise the -1STE1LF bottom-contact version is the correct fit.

Frequently asked questions

What is the mating cycle life of SFW18R-1STE1LF?

Rated for 20 mating cycles minimum with the tin-plated contacts. In a low-cycling application like a set-and-forget cable assembly, that is sufficient; for frequent field disconnect, consider a gold-plated alternative in the SFW-R series.

Does SFW18R-1STE1LF have a datasheet with pinout and dimensions?

The spec table on this page lists all confirmed ratings: 18 positions, 1.00mm pitch, 0.106" height, 0.30mm/0.33mm FPC thickness, and bottom-contact orientation. For a full dimensional drawing, the base product number SFW18R leads to the Amphenool ICC (FCI) product page.