Skip to main content
Log in
SFW4R-1STAE1LF — Amphenol product photo
Amphenol

SFW4R-1STAE1LF — Amphenol ICC 1.00mm Pitch 4-Pos

MPNSFW4R-1STAE1LF
Active

Amphenol ICC (FCI) SFW-R series, 4-position FPC connector, 1.00mm pitch, right-angle SMT, ZIF actuation with slide lock, gold-plated contacts rated 1A.

$0.5700Ref. price · indicative, final on quote
SFW4R-1STAE1LF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

SFW4R-1STAE1LF Technical Specifications
ParameterValue
SeriesSFW-R
Mounting typeSurface Mount, Right Angle
Cable end typeStraight, Tapered
Flat flex typeFPC
Connector (Contact type)Contacts, Bottom
Voltage rating100V
Current rating1A
Operating temperature-55°C~105°C
Housing colorBrown
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialPolyphenylene Sulfide (PPS), Glass Filled
Actuator materialPolyphenylene Sulfide (PPS), Glass Filled
Height above board0.106\" (2.70mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesZero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishGold
Locking featureSlide Lock
FFC, FCB thickness0.30mm, 0.33mm
Positions4

Product details

1.00 mm Pitch, 4-Position, Right-Angle ZIF FPC Connector

The SFW4R-1STAE1LF is a 4-position FPC connector on 1.00mm pitch, terminated via surface-mount right-angle solder tails. The ZIF mechanism with a slide lock accepts FPC cables 0.30mm or 0.33mm thick, straight or tapered end. Gold-plated phosphor bronze contacts are rated 1A per circuit at 100V. This is a bottom-contact connector — the FPC pads mate against the contacts on the lower side of the housing, which keeps the cable flat against the board.

ZIF Slide Lock and FPC Compatibility

The slide lock actuator opens the contact beams for zero-insertion-force cable insertion, then slides closed to clamp the FPC. Accepted FPC thickness is 0.30mm or 0.33mm; the contact wipe on insertion cleans the pad surface before the lock engages.

Frequently asked questions

What FPC cable thickness and end type does the SFW4R-1STAE1LF accept?

It accepts FPC cables 0.30mm or 0.33mm thick, with either straight or tapered ends. The ZIF slide lock secures the cable without requiring a secondary latch.