The SFW4S-2STE1LF: It is available for order through our independent distribution network — quoted to your BOM quantity upon request.
Pitch and Board Fit
At this pitch, the connector suits signal-level flex circuits where board space is moderate — not the ultra-dense 0.5 mm class, but a step up in routing ease for standard two-layer boards.
ZIF Actuation and Flex Compatibility
Zero Insertion Force (ZIF) means the actuator opens to accept the FFC or FPC without scraping the pads — the contact wipes on closure, not insertion. The connector accepts 0.33 mm thick flex circuits, a common thickness for signal FPCs in consumer and industrial gear.
Current, Voltage, and Temperature Range
The 1 A limit is typical for a 1.00 mm pitch tin-plated contact — adequate for signal-level loads and low-power sensor interfaces. The wide temperature span covers most indoor and outdoor equipment enclosures.
Housing and actuator are glass-filled thermoplastic rated UL94 V-0. Contacts are phosphor bronze with tin finish — suitable for moderate mating cycles (20 cycles listed) in applications where the flex is not frequently disconnected.