5-Position FPC Connector with 1.00 mm Pitch — What the Ratings Mean
The SFW5S-2STMAE1LF: The ZIF (Zero Insertion Force) actuator means the FPC slides in without force, then the actuator locks it in place. This prevents pad damage on thin flex circuits — a common failure mode in non-ZIF designs. The vertical orientation (contacts vertical, 1-sided) mates the FPC perpendicular to the PCB, which matters for z-height budget in stacked-board assemblies.
Termination and Mounting — SMT with Kinked Pins
Surface-mount termination with kinked pins — the kink provides a mechanical interference fit in the PCB hole before reflow, improving alignment and solder-joint reliability during reflow. Accepts FPC thickness of 0.30 mm — confirm your flex circuit's thickness matches this spec. The cable end type is straight or tapered; tapered ends ease insertion into the ZIF mechanism.