Skip to main content
SLW10R-1C7LF — Amphenol product photo

SLW10R-1C7LF FFC/FPC Connector, 10 Pos, 1.00mm, ZIF

MPNSLW10R-1C7LF
Active

Amphenol ICC (FCI) SLW-R series, SLW10R-1C7LF — 10-position, 0.039" (1.00mm) pitch FFC/FPC connector, through hole right angle, ZIF flip lock, bottom contact, tin-plated phosphor bronze contacts, 1 A per circuit, 100 V rating, -55°C to 85°C operating range.

$0.4000Ref. price · indicative, final on quote
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

SLW10R-1C7LF Technical Specifications
ParameterValue
SeriesSLW-R
Mounting typeThrough Hole, Right Angle
Cable end typeNotched or Tabbed
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating100V
Current rating1A
Operating temperature-55°C~85°C
Housing colorBlack
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialPolyamide (PA), Nylon, Glass Filled
Actuator materialPolyamide (PA), Nylon, Glass Filled
Height above board0.157\" (4.00mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTray
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishTin
Locking featureFlip Lock
FFC, FCB thickness0.30mm
Positions10

Product details

10-Position ZIF FFC/FPC Connector — 1.00 mm Pitch, Right Angle

The SLW10R-1C7LF: Rated 1 A per circuit at 100 V, the tin-plated contacts handle low-power signal and control lines inside equipment enclosures where the connector sees limited mating cycles — the 20-cycle rating means this is a set-and-forget interconnect, not a frequent-disconnect point.

Through Hole Right Angle Mount — Board-Edge Fit

This orientation suits board-edge cable routing in space-constrained enclosures — the connector sits low enough to clear adjacent components and the solder tails provide mechanical strength against cable pull. The black color is cosmetic; no functional difference from other SLW-R colors.

No official replacement or successor is recorded — the SLW-R series continues as the active product line. The part ships in tray packaging.

Frequently asked questions

What cable thickness does SLW10R-1C7LF support?

It accepts 0.30 mm thick FFC or FPC with a notched or tabbed cable end. The ZIF flip lock secures the cable without a secondary latch.

Is SLW10R-1C7LF RoHS compliant?

Yes, RoHS compliant per the current directive.