The SLW20S-1C7LF is a 20-position, 1.00 mm pitch vertical FFC/FPC connector from the SLW-S series.
Through-Hole Mount and Board Profile
Through-hole mounting with kinked pins anchors the connector against the board during wave solder. The vertical orientation and 5.50 mm height above board fit standard clearance envelopes — no right-angle routing needed. The 0.33 mm FFC/FPC thickness is the only accepted cable gauge; a thicker flex will not seat fully under the slide lock.
The 1 A limit is set by the contact beam and tin plating — pushing beyond that raises the temperature rise above the polyamide housing's safe margin.
The SLW20S-1C7LF shares the same 1.00 mm pitch, 5.50 mm height, ZIF slide lock, and tin contacts with the SLW22S-1C7LF (22 positions), SLW26S-1C7LF (26 positions), and SLW28S-1C7LF (28 positions). No other spec changes between these siblings.