Skip to main content
Log in
Amphenol SLW4R-1C7LF — FFC / FPC Cable Assemblies
Amphenol

SLW4R-1C7LF FFC Connector – 1.00mm Pitch, 4-Pos

MPNSLW4R-1C7LF
Active

Amphenol ICC (FCI) SLW-R series, SLW4R-1C7LF — 4-position FFC/FPC connector, 0.039" (1.00mm) pitch, bottom contacts, ZIF flip-lock actuator, through-hole right-angle mount, tin-plated phosphor bronze contacts, rated 1 A at 100 V, UL94 V-0 housing.

$0.4200Ref. price · indicative, final on quote
SLW4R-1C7LF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

SLW4R-1C7LF Technical Specifications
ParameterValue
SeriesSLW-R
MountingThrough Hole, Right Angle
Cable end typeNotched or Tabbed
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating100V
Current rating1A
Operating temperature-55°C~85°C
Housing colorBlack
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialPolyamide (PA), Nylon, Glass Filled
Actuator materialPolyamide (PA), Nylon, Glass Filled
Height above board0.157\" (4.00mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTray
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishTin
Locking featureFlip Lock
FFC, FCB thickness0.30mm
Positions4

Product details

4-Position FFC/FPC Connector with ZIF Flip Lock

The SLW4R-1C7LF is a 4-position FFC/FPC connector from Amphenol ICC's SLW-R series, built for low-signal-density board-to-flex interconnects. Solder retention features anchor the connector during reflow and resist shear force from cable strain.

Position Count and Series Fit

At 4 positions, the SLW4R-1C7LF is the lowest-circuit member of the SLW-R series. For higher-density needs, the series offers 10-position (SLW10R-1C7LF), 14-position (SLW14R-1C7LF), and 20-position (SLW20R-1C7LF) variants — all sharing the same 1.00 mm pitch, 4.00 mm height above board, and ZIF flip-lock actuator. The choice between them is purely a circuit-count decision; the footprint scales linearly with position count.

RoHS compliant.

Frequently asked questions

Is SLW4R-1C7LF compatible with notched or tabbed FFC cables?

Yes. The connector accepts FFC or FPC with notched or tabbed cable ends, as specified in the product record. The ZIF flip lock secures the cable after insertion.