Amphenol ICC (FCI) SLW-R series, SLW5R-1C7LF, 5-position FFC/FPC connector, 0.039" (1.00mm) pitch, through-hole right-angle, ZIF slide-lock, tin contacts, 1 A, 100 V, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | SLW-R |
| Mounting | Through Hole, Right Angle |
| Cable end type | Tapered |
| Flat flex type | FFC, FPC |
| Connector (Contact type) | Contacts, Bottom |
| Voltage rating | 100V |
| Current rating | 1A |
| Operating temperature | -55°C~85°C |
| Housing color | Black |
| Actuator color | Black |
| Contact material | Phosphor Bronze |
| Housing material | Polyamide (PA), Nylon, Glass Filled |
| Actuator material | Polyamide (PA), Nylon, Glass Filled |
| Height above board | 0.157\" (4.00mm) |
| Material flammability rating | UL94 V-0 |
| Pitch | 0.039\" (1.00mm) |
| Package | Tray |
| Features | Zero Insertion Force (ZIF) |
| Termination | Kinked Pin |
| Mating cycles | 20 |
| Contact finish | Tin |
| Locking feature | Slide Lock |
| FFC, FCB thickness | 0.33mm |
| Positions | 5 |
The SLW5R-1C7LF: The ZIF slide-lock actuator accepts a 0.33mm-thick FPC with a tapered cable end; the slide lock clamps the contacts after insertion, so the FPC is held without insertion force on the pads — a practical detail when the cable is routed in a tight enclosure and the connector is mated blind.
Engineers and buyers need the datasheet to verify electrical and mechanical specifications before using the part in a design.
Buyers need pricing for budget planning and cost comparison across distributors.
Sourcing buyers must know real-time stock to avoid production delays or excess lead time.
Design engineers need pinout confirmation to ensure correct PCB layout and signal routing.
Mechanical engineers and layout designers require precise dimensions for board fit and mating clearance.
When the part is unavailable or end of life, buyers and technicians need a cross-reference to an alternative.