Skip to main content
SMP-FS2A-224 — Amphenol product photo

SMP-FS2A-224 SMP Bullet Adapter, 50 Ohm, DC to 26.5 GHz

MPNSMP-FS2A-224
Active

SMP-FS2A-224, SMP to SMP, straight plug-to-plug adapter, female-to-female, 50 Ohm, DC to 26.5 GHz, free-hanging, gold-plated beryllium copper body, PTFE dielectric.

$8.7600Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

SMP-FS2A-224 Technical Specifications
ParameterValue
Adapter typePlug to Plug
Mounting typeFree Hanging (In-Line)
Adapter seriesSMP to SMP
Fastening typeSnap-On, Snap-On
Conversion typeSame Series
Frequency - max26.5 GHz
Operating temperature-65°C~165°C
Body materialBeryllium Copper
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
StyleStraight
PackageBulk
Impedance50Ohm
Body finishGold
Center genderFemale to Female
Mating cycles100
Center contact platingGold
Convert to (Adapter end)SMP Plug, Female Socket
Convert from (Adapter end)SMP Plug, Female Socket

Product details

SMP Bullet Adapter — Straight, Female-to-Female, 50 Ohm to 26.5 GHz

The SMP-FS2A-224 is a straight SMP plug-to-plug adapter from the SMP series, configured female-to-female — it links two male SMP connectors end-to-end in a free-hanging, in-line signal path. Mating is snap-on at both ends, with a rated life of 100 mating cycles.

Frequency Range and Impedance — What the Ratings Mean

Rated to 26.5 GHz. The straight body keeps the signal path direct.

This adapter mates with any standard SMP male plug (snap-on interface) at both ends. The female-to-female centre gender means it accepts male centre pins on both sides. It is not compatible with SMPM connectors — the SMPM interface is smaller and uses a different shell diameter and detent geometry. The snap-on fastening at each end provides a quick connect/disconnect for blind-mate or densely populated boards; the 100-cycle rating is typical for a test or module interconnect where the adapter is mated and unmated during assembly or calibration, not for a permanent install that sees hundreds of cycles.

Frequently asked questions

What is the impedance of the SMP-FS2A-224?

The SMP-FS2A-224 is a 50 Ohm adapter, matching the standard impedance for most RF systems and test equipment.