Skip to main content
Log in
SMP-MSLD-PCS-20 — Amphenol product photo
Amphenol

Amphenol RF SMP-MSLD-PCS-20 SMP Jack, 50 Ohm, 20 GHz, SMT

MPNSMP-MSLD-PCS-20
Active

Amphenol RF SMP series SMP jack, male pin, 1 port, 50 Ohm impedance, 20 GHz max, SMT, gold body, limited detent snap-on, 500 mating cycles.

$5.3500Ref. price · indicative, final on quote
SMP-MSLD-PCS-20 datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

SMP-MSLD-PCS-20 Technical Specifications
ParameterValue
Mounting typeSurface Mount
Connector typeJack, Male Pin
Fastening typeSnap-On
Frequency - max20 GHz
Operating temperature-40°C~85°C
Body materialBrass
Housing colorGold
Dielectric materialLiquid Crystal Polymer (LCP)
Center contact materialBrass
PackageBag
FeaturesLimited Detent
Impedance50Ohm
Body finishGold
Mating cycles500
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

SMP Jack for 20 GHz Signal Paths

The snap-on fastening with limited detent means the engagement force is lower than a full-detent SMP, which helps when the connector sits in a blind-mate or multi-port array where you don't want to fight a stiff push.

20 GHz vs 26.5 GHz — Bag vs Tape

The SMP-MSLD-PCS-20 shares the same SMP interface, limited detent, and 500-cycle life as the SMP-MSLD-PCS18T. The difference is the max frequency: 20 GHz here vs 26.5 GHz on the PCS18T. The PCS18T uses a PTFE dielectric and beryllium copper centre contact to hit the higher band; this part uses LCP dielectric and a brass centre contact, which keeps the cost lower for applications that stay under 20 GHz. Both ship in different packaging — this one in a bag, the PCS18T on tape and reel for automated pick-and-place.

Frequently asked questions

Is SMP-MSLD-PCS-20 compatible with SMPM connectors?

SMP and SMPM are different interface sizes — SMP is the larger standard. An SMP plug does not mate directly with an SMPM jack without an adapter.