Frequency and Signal Integrity Limits
The 112553: Above 4 GHz the BNC interface geometry introduces mode conversion and the return loss degrades; for higher-frequency work a Type N or SMA would be the right interface.
Comparing the 50 Ohm and 75 Ohm BNC Jacks
The 112553 is a 50 Ohm jack. The sibling 112515-75 is a 75 Ohm version of the same physical BNC interface — same body, same nickel finish, same 500 mating cycles, same 4 GHz frequency ceiling. The difference is the center contact diameter and the PTFE dielectric geometry, which set the characteristic impedance. A 50 Ohm jack mated to a 75 Ohm cable or connector creates a mismatch that adds about 0.5 dB of return loss at low frequencies and worsens with frequency. For video or broadcast distribution (75 Ohm systems), use the 112515-75; for RF test and telecom (50 Ohm systems), the 112553 is the correct pick.
