TNC Jack for RG-58 — 50 Ohm, 11 GHz, Crimp Termination
The Amphenol RF 122122 is a TNC jack (female socket) with a 50 Ohm impedance, rated to 11 GHz. It terminates to RG-58 and similar 50 Ohm cables (RG-58A, 58B, 58C, 141, 303, LMR-195, Belden B7806A, 9907) via a crimp-on shield and center contact.
Cable Fit and Termination Checklist
This jack is designed for RG-58-class cables with a nominal impedance of 50 Ohms. The shield termination is crimp; the center contact is also crimp. The included ferrule compresses over the cable jacket and braid. The cable group listed — RG-58, 58A, 58B, 58C, 141, 303, LMR-195, Belden B7806A, 9907 — covers the common 50 Ohm small-diameter coax types used in short-run RF interconnects, antenna feeds, and test leads. The insertion loss is 0.18 dB across the band, typical for a well-matched TNC interface at these frequencies.
Cross-Shop: Free-Hanging vs Bulkhead
The 122122 is the free-hanging (in-line) version of the TNC jack. Its sibling 122168 is the same TNC jack, 50 Ohm, 11 GHz, and same cable group, but adds bulkhead mounting hardware — a gasket, lockwasher, and nut — for panel-feedthrough duty. Both use the same crimp termination and gold-plated center contact. The choice is purely mechanical: the 122122 stays on the cable end; the 122168 bolts through a panel. For a cable-to-cable or cable-to-enclosure link without a bulkhead, the 122122 is the right call.
