Skip to main content
Amphenol 132236RP

Amphenol RF 132236RP RP-SMA Jack, 50 Ohm, 12.4 GHz

MPN 132236RP
Active

Amphenol RF, RP-SMA jack, 132236RP, 50 Ohm, DC-12.4 GHz, 1 port, male pin, threaded, crimp shield, solder contact, gold body, -65°C~165°C, 500 cycles, kit includes contact and ferrule.

$11.0800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

132236RP key specifications
ParameterValue
MountingFree Hanging (In-Line)
Connector typeJack, Male Pin
Fastening typeThreaded
Voltage rating375 V
Frequency - max12.4 GHz
Cable groupBelden 7807A, LMR-200
Operating temperature-65°C~165°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass
PackageBulk

All specifications

132236RP additional specifications
ParameterValue
Includes3 pcs - 1 Connector, 1 Contact, 1 Ferrule
Impedance50Ohm
Body finishGold
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

RP-SMA Jack, Male Pin — 50 Ohm, DC to 12.4 GHz

The characteristic impedance is 50 Ohm, and the frequency range extends from DC to 12.4 GHz, making it suited for Wi-Fi, ISM-band, and general-purpose RF interconnects where the cable run uses Belden 7807A or LMR-200. The gold-over-brass body finish and gold-plated centre contact support 500 mating cycles, typical for field-service and test-port duty.

12.4 GHz Ceiling vs 18 GHz Sibling

The 132236RP is rated to 12.4 GHz, while the bulkhead-mount 132134-11 (same series, SMA jack, female socket) is specified to 18 GHz. The difference comes from the RP-SMA interface geometry and the free-hanging cable termination — the crimp shield and solder contact introduce a slightly higher discontinuity than the solder-shield bulkhead variant. For applications below 12.4 GHz (Wi-Fi 6E, 5G sub-6, L-band through X-band), the 132236RP is a direct fit. Above that, the 132134-11 or a precision SMA would be needed.

Cable and Termination Kit

The cable group listed is Belden 7807A and LMR-200, both 50 Ohm low-loss cables with a nominal outer diameter that fits the included ferrule. No additional hardware is needed for a single cable assembly.

MPN
132236RP