SMA Receptacle with Extended Insulation for 50 Ohm Systems
The 132318: The connector uses a PTFE dielectric with extended insulation — the dielectric protrudes past the mating interface, which increases the creepage distance and reduces the risk of flashover in high-voltage or low-pressure environments.
500 Mating Cycles at Full Temperature Range
The gold-on-gold contact interface resists fretting corrosion over the full cycle life.
Position Against the 132203 Bulkhead Jack
The 132318 is a panel-mount flange receptacle with a right-angle body; the 132203 is a bulkhead jack that mounts from the front side with a nut. Both share the SMA interface, 50 Ohm impedance, 12.4 GHz frequency ceiling, and 500-cycle rating. The choice comes down to the mounting hole pattern: the 132318 uses a flange with four holes, while the 132203 uses a single D-hole and retaining nut. If your panel is pre-drilled for a bulkhead jack, the 132203 is the direct fit; if you have a flange-mount cutout, this 132318 is the one.
