SMA End-Launch Receptacle for RF Board-Edge Applications
The Amphenol RF 132414 is an SMA receptacle, female socket, designed for board edge, end launch mounting. The PTFE dielectric maintains consistent impedance through the launch.
What the 50 Ohm and 18 GHz Ratings Mean for Signal Integrity
The 18 GHz upper frequency limit means this connector can pass microwave signals up to that frequency with controlled VSWR; beyond that, the interface geometry and dielectric losses degrade the signal. For a board-edge launch, the end launch footprint must be designed so the centre pin aligns with the trace's ground plane transition — a mismatch here adds inductance and shifts the impedance off 50 Ohm.
Mating and Termination: Threaded Coupling and Solder Tab
The threaded fastening type provides a secure, vibration-resistant mate — the coupling nut torques down to a specified value, preventing loosening under shock or thermal cycling. This is a permanent termination; no crimp tool is needed. The receptacle mates with any standard SMA plug (male pin) of the same interface — no keying, so verify the pin depth and interface dimensions per MIL-STD-348.
