Skip to main content
Amphenol 142136

Amphenol RF 142136 SMB Receptacle, 50 Ohm, 4 GHz

MPN 142136
Active

Amphenol RF SMB receptacle, male pin, 50 Ohms, 4 GHz, 335 V, through hole, solder termination, nickel body, gold center contact, snap-on fastening, 500 mating cycles.

$4.6400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

142136 key specifications
ParameterValue
MountingThrough Hole
Connector typeReceptacle, Male Pin
Fastening typeSnap-On
Voltage rating335 V
Frequency - max4 GHz
Operating temperature-65°C ~ 165°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass
PackageBag
Impedance50 Ohms

All specifications

142136 additional specifications
ParameterValue
Body finishNickel
Mating cycles500
Insertion loss0.3dB
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

The PTFE dielectric and gold-plated centre contact keep insertion loss to 0.3 dB across the band, and the 500-cycle mating rating supports repeated field reconnections without contact degradation.

The 0.3 dB insertion loss at 4 GHz is a clean figure for an SMB connector; it tells you the contact geometry and dielectric are well-controlled through the launch. The 500 mating cycles are a practical limit for a snap-on connector — the spring fingers in the receptacle wear with each cycle, so plan for field replacements if the connection is frequently broken.

The 142138 is the same SMB jack with identical electrical specs — 50 Ohm, 4 GHz, 0.3 dB insertion loss, 500 cycles — but with a gold-plated body instead of nickel. The gold finish adds corrosion resistance in humid or salt-fog environments, while the nickel body on the 142136 is the standard industrial choice for indoor equipment. Both are male-pin receptacles; the gold body is the upgrade for field-deployed or outdoor gear, the nickel body for controlled enclosures.

MPN
142136