Skip to main content
Amphenol 282103-75

Amphenol RF 282103-75 1.0/2.3 Plug, 75 Ohm, RG-179

MPN 282103-75
Active

Amphenol RF 1.0/2.3 plug, 282103-75, 75 Ohm, push-pull, crimp termination, RG-179 Double Braid, 3 GHz, 250 V, 500 mating cycles, full kit.

$8.6600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

282103-75 key specifications
ParameterValue
MountingFree Hanging (In-Line)
Connector type1.0/2.3
Fastening typePush-Pull
Voltage rating250 V
Frequency - max3 GHz
Cable groupRG-179 Double Braid
Operating temperature-65°C~165°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper, Brass
PackageBulk

All specifications

282103-75 additional specifications
ParameterValue
Includes5 pcs - 1 Connector, 1 Contact, 1 Ferrule, 1 Insulator, 1 Sleeve
Impedance75Ohm
Body finishNickel
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationCrimp
Center contact platingGold

Product details

The Amphenol RF 282103-75 is a 75 Ohm 1.0/2.3 interface plug, male pin, with a push-pull fastening — not a bayonet-lock BNC. Rated to 3 GHz, it supports standard-definition and high-definition video signal paths as well as data links that stay within that bandwidth.

What Ships in the Box — It's a Full Termination Kit

This is not just a connector shell. The bulk package includes five pieces per order unit: one connector body, one center contact, one ferrule, one insulator, and one sleeve. That covers everything needed to terminate one end of an RG-179 cable — no separate loose parts to source for a single termination.

75 Ohm, Not 50 Ohm — Why That Matters

It is not a 50 Ohm BNC — the 1.0/2.3 interface is dimensionally smaller and uses a push-pull coupling instead of a bayonet lock. Using it in a 50 Ohm system will cause an impedance mismatch and signal reflection.

Mating Half and Cable Prep

This plug mates with the Amphenol RF 282133-75, a 1.0/2.3 bulkhead receptacle with a gold body and solder termination. The crimp termination on this plug requires a standard hex crimp tool for RG-179 — the ferrule compresses over the braid, and the center contact crimps onto the center conductor. No soldering at the cable end, which speeds field termination.

MPN
282103-75