Skip to main content
Amphenol 282121-75

Amphenol RF 282121-75, 1.0/2.3 Receptacle, 75 Ohm, 4 GHz

MPN 282121-75
Active

Amphenol RF 1.0/2.3 receptacle, 75 Ohm, 4 GHz, 250 V, panel mount through-hole, gold-plated brass body, beryllium copper centre contact, 500 mating cycles.

$11.5000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

282121-75 key specifications
ParameterValue
MountingPanel Mount, Through Hole
Connector type1.0/2.3
Fastening typePush-Pull
Voltage rating250 V
Frequency - max4 GHz
Mounting featureBulkhead - Front Side Nut
Operating temperature-65°C~165°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBulk

All specifications

282121-75 additional specifications
ParameterValue
Includes2 pcs - 1 Connector, 1 Nut
Impedance75Ohm
Body finishGold
Mating cycles500
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

75-Ohm 1.0/2.3 Receptacle, 4 GHz, Bulkhead-Mount

The 282121-75: The 75-ohm impedance is the defining parameter here — it matches 75-ohm cable and system impedance, common in broadcast video, telecom, and test equipment where a 50-ohm path would introduce a mismatch.

Panel Mount with Hardware Included

Mounts through a panel hole with a bulkhead — front side nut — and the package includes the connector and nut (2 pieces total). The through-hole solder termination for the centre contact and shield means the signal and ground paths are soldered to the PCB or cable centre conductor and braid. The push-pull fastening type allows quick mate/demate without tools, but the bulkhead nut secures the connector body to the panel so the push-pull action doesn't stress the solder joints.

Temperature Range and Dielectric

The 250 V rating across the PTFE is conservative for the material; the real voltage limit in a 75-ohm system is usually set by the cable or the air gap at the interface, not the connector itself.

Mating Half and System Compatibility

Mates with a male 1.0/2.3 plug, push-pull fastening. The 1.0/2.3 interface is a defined standard for compact 75-ohm coaxial connectors — look for a male plug with the same 75-ohm impedance and 1.0/2.3 style.

MPN
282121-75