Skip to main content
Amphenol 2FA1-NDRP-PCB-6

Amphenol RF 2FA1-NDRP-PCB-6 SMB Fakra Plug, 50 Ohm, 4 GHz

MPN 2FA1-NDRP-PCB-6
Active

Amphenol RF SMB Fakra plug, male pin, 1 port, 50 Ohm, 4 GHz max, Code D keying, right-angle through-hole, locking ramp, gold center contact, tin body, tray.

$4.9700 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2FA1-NDRP-PCB-6 specifications
ParameterValue
MountingThrough Hole, Right Angle
Connector typePlug, Male Pin
Fastening typeLocking Ramp
Frequency - max4 GHz
Operating temperature-65°C~165°C
Body materialZinc Die Cast
Housing colorViolet, Claret
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass
PackageTray
FeaturesCode D
Impedance50Ohm
Body finishTin
Mating cycles100
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

Right-angle Fakra plug for board-edge RF

The 2FA1-NDRP-PCB-6: It carries the Code D keying, which corresponds to the violet/claret housing color and prevents cross-mating with other Fakra color codes in multi-connector harness assemblies.

Mounting and termination for board layout

The through-hole solder termination for both the center pin and the shield provides a mechanically robust joint that handles the strain of a coaxial cable attached to the mating half.

Locking ramp and environmental range

The 100 mating cycle rating is typical for a Fakra connector; it is not intended for frequent field reconnection but holds up through the assembly and service life of a vehicle.

Code D keying and material construction

The Code D keying is physically distinct from other Fakra codes (A, B, C, etc.), so a Code D plug will only mate with a Code D receptacle. The zinc die-cast body with tin finish provides EMI shielding and corrosion resistance, while the gold-plated brass center contact ensures low and stable contact resistance over the rated 100 mating cycles. The connector ships in a tray, which is the standard packaging for automated pick-and-place assembly of through-hole components.

Comparison with FA1-NDRP-PCB-8

The FA1-NDRP-PCB-8 is the closest functional peer in the same Fakra series — same Code D keying, same 50 Ohm impedance, same locking ramp, same 100 mating cycles, and same 6 GHz frequency rating. The key difference is packaging: the 2FA1-NDRP-PCB-6 ships in a tray as a single connector, while the FA1-NDRP-PCB-8 ships in a box and includes a housing as a two-piece assembly (connector plus housing). For a BOM line that specifies the bare plug without the separate housing, the 2FA1-NDRP-PCB-6 is the correct line item.

MPN
2FA1-NDRP-PCB-6