Skip to main content
Hirose Electric Co Ltd DF11-10DEP-2A

Hirose DF11-10DEP-2A, 10-Position 2.00mm Pitch Adapter

MPN DF11-10DEP-2A
Last Buy

Hirose DF11 series, 10-position 2-row plug-to-plug adapter, 0.079" (2.00mm) pitch, panel mount snap-in, Last Buy lifecycle.

$0.8800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

DF11-10DEP-2A specifications
ParameterValue
SeriesDF11
MountingPanel Mount, Snap-In
Pitch0.079\" (2.00mm)
PackageBag
Row spacing0.079\" (2.00mm)
Rows2
Positions10
Convert to (Adapter end)Plug, Male Pins
Convert from (Adapter end)Plug, Male Pins

Product details

Adapter Identity and Series Position

The Hirose DF11-10DEP-2A is a 10-position, 2-row plug-to-plug adapter from the DF11 series, a compact 2.00mm pitch interconnect family used for wire-to-board and inline signal connections in consumer electronics, industrial controls, and automotive interior systems. Both ends terminate as plug housings with male pins, making this an inline adapter rather than a standard header or receptacle — it bridges two DF11 receptacle cable assemblies or directly mates with a DF11 receptacle on a board. The 0.079" (2.00mm) pitch and dual-row layout match the standard DF11 footprint, so the board-side pattern is the same as any 10-position DF11 header.

Last Buy — Sourcing Reality

The DF11-10DEP-2A carries a Last Buy lifecycle status. This means Hirose has announced end-of-production — the part is not in active manufacture and is available only through remaining distributor inventory or the surplus channel. If your BOM calls for this exact part, the window for factory orders has closed; sourcing is limited to what independent distributors hold. Each order is quoted against current availability — confirmed at quote time, not assumed.

Mounting and Physical Fit

The snap-in design means the panel cutout must match the DF11-10DEP-2A's housing profile; it's not a board-mounted part. Both ends present male pins, so it accepts two DF11 receptacle housings (like the DF11-10DS-2C) or one receptacle and a direct board-mount header on the other side. The 2.00mm row spacing mirrors the pitch, keeping the overall footprint compact for dense harness layouts.

MPN
DF11-10DEP-2A