Skip to main content
JST B03B-PNISK-1A

B03B-PNISK-1A JST PNI Header 3 Position 2 mm Pitch

MPN B03B-PNISK-1A
Active

JST PNI series, Board to Cable/Wire, 3 Position Header, 2.00 mm Pitch, 3 A, 100 V, Tin Contacts, Through Hole, Press-Fit, Latch Lock, UL94 V-0

$0.4300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesPNI
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

B03B-PNISK-1A key specifications
ParameterValue
SeriesPNI
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typeLatch Lock
Voltage rating100V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.402\" (10.20mm)
Insulation materialPolyamide (PA66), Nylon 6/6, Glass Filled

All specifications

B03B-PNISK-1A additional specifications
ParameterValue
Mated stacking heights12.25mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions3
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin

Product details

3-Position 2 mm Header for Wire-to-Board

The B03B-PNISK-1A is a 3-position, single-row header from JST's PNI series, designed for board-to-cable/wire connections. Its 2.00 mm pitch sets the PCB footprint and the per-contact current ceiling — at 3 A the temperature rise stays within the PA66 housing limit. The shrouded 4-wall design with a latch lock provides vibration-resistant mating without a secondary lock, suited for equipment where the cable is routed near moving parts.

Board Fit and Termination

Through-hole mounting with press-fit, solder termination — the press-fit tail holds the header in place during wave solder, eliminating the need for a secondary hold-down. The 0.134" (3.40 mm) post length provides enough stand-off for cleaning under the header. Mated stacking height is 12.25 mm, which sets the z-height budget for the enclosure — confirm this clears any components on the board opposite the header.

MPN
B03B-PNISK-1A