Skip to main content
JST B2B-ZR

JST B2B-ZR Header – 2-Pos, 1.5mm Pitch, Through Hole, Active

MPN B2B-ZR
Active

JST ZH series, B2B-ZR, Board to Cable/Wire Header, 2 circuits, 1.50 mm pitch, Through Hole, Shrouded - 4 Wall, Detent Lock, 1 A, 50 V, UL94 V-0, Bulk

$0.1800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS non-compliant
IncotermsDAP / DDP Available
SeriesZH
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

B2B-ZR key specifications
ParameterValue
SeriesZH
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typeDetent Lock
Voltage rating50V
Current rating1A
Operating temperature-25°C ~ 85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.177\" (4.50mm)
Insulation materialPolyamide (PA66), Nylon 6/6, Glass Filled

All specifications

B2B-ZR additional specifications
ParameterValue
Mated stacking heights5.6mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeCircular
Rows1
Pitch0.059\" (1.50mm)
Positions2
Contact finish - postTin
Contact length - post0.106\" (2.69mm)
Overall contact length0.256\" (6.50mm)
Contact finish - matingTin
Contact length - mating0.094\" (2.40mm)

Product details

1.50 mm pitch, 2-position header for wire-to-board

The B2B-ZR: Its 0.059" (1.50 mm) pitch allows tight routing on the PCB, while the shrouded 4-wall design protects the male pins during handling and mating.

Through-hole termination with tin plating

Termination is through-hole solder, with tin-plated posts (0.106" / 2.69 mm contact length) and tin-plated mating surfaces. Mated stack height is 5.6 mm, which sets the clearance needed above the board when mated with the ZH receptacle.

Peer comparison: through-hole vs surface-mount

The B2B-ZR is the through-hole version. Its surface-mount sibling, the B2B-ZR-SM4-TFT, shares the same 2-position, 1.50 mm pitch, and detent lock but adds pick-and-place features and solder retention tabs for SMT assembly. The through-hole variant offers stronger mechanical retention in high-vibration environments without the need for reflow.

MPN
B2B-ZR