Skip to main content
Molex 0039013063

Molex Mini-Fit Jr 0039013063, 6-Position Plug, 4.20mm Pitch

MPN 0039013063
Active

Molex Mini-Fit Jr 5559 series, 0039013063, 6-position dual-row plug, 4.20mm pitch, natural PA66 housing, crimp termination, locking ramp, free-hanging, -40°C to 105°C.

$0.4400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

0039013063 specifications
ParameterValue
SeriesMini-Fit Jr 5559
TypeMale Pin
MountingFree Hanging (In-Line)
Connector typePlug
Fastening typeLocking Ramp
Operating temperature-40°C ~ 105°C
ColorNatural
Insulation materialPolyamide (PA66), Nylon 6/6
NoteContacts Not Included
Pitch0.165\" (4.20mm)
PackageBulk
Row spacing0.165\" (4.20mm)
Rows2
Contact terminationCrimp
Positions6

Product details

6-Position Mini-Fit Jr Plug, 4.20mm Pitch

The Molex 0039013063 is a 6-circuit plug from the Mini-Fit Jr 5559 series, built for wire-to-wire and wire-to-board power interconnects in harness assemblies. It carries two rows on a 0.165" (4.20mm) pitch, giving it the same footprint as the full Mini-Fit Jr family — so the board layout and mating receptacle stay consistent across 2- through 24-circuit variants.

The listing note spells it out: contacts not included. This plug ships as an empty housing only. You need the 45750-series male crimp terminals (Molex 45750-3111 for 18-24 AWG, or the 45750-2111 for 20-24 AWG) to populate it. For a harness build, figure one terminal per circuit plus a few spares for pull-test rejects.

Mates With 5557 Receptacle — Locking Ramp Holds Under Vibration

This plug mates with the Mini-Fit Jr 5557-series receptacle housing (dual-row, same 4.20mm pitch). That ramp is the difference between a connector that stays mated on a forklift and one that backs off a half-turn and drops a sensor. No secondary lock or TPA required for most applications, though the 5557 receptacle does accept a CPA (Connector Position Assurance) insert if the customer spec demands it.

MPN
0039013063