Skip to main content
Molex 0734042300

Molex 73404 0734042300 SMB Receptacle, 50 Ohm, 4 GHz

MPN 0734042300
Active

Molex 73404 series SMB receptacle, male pin, 0734042300, 50 Ohm, 4 GHz, 0.2 dB insertion loss, snap-on, through hole, gold body, 500 mating cycles.

$3.4600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

0734042300 key specifications
ParameterValue
Series73404
MountingThrough Hole
Connector typeReceptacle, Male Pin
Fastening typeSnap-On
Voltage rating335 V
Frequency - max4 GHz
Operating temperature-55°C ~ 155°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass
PackageBulk

All specifications

0734042300 additional specifications
ParameterValue
Impedance50 Ohms
Body finishGold
Mating cycles500
Insertion loss0.2dB
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

SMB Receptacle for 50 Ohm RF Signal Paths

The Molex 0734042300 is a 50 Ohm SMB receptacle in the 73404 series, carrying a male pin contact inside a snap-on mating receptacle body. It is a through-hole, solder-terminated RF interconnect rated to 4 GHz with a typical insertion loss of 0.2 dB — sized for board-level coaxial signal routing in communications, test equipment, and instrumentation where the SMB bayonet-style quick mate is preferred over a threaded interface. The gold-plated brass body and gold centre contact plating support the 500-cycle mating life, and the PTFE dielectric keeps the impedance stable across the -55°C to 155°C operating range.

RF Performance and Signal Integrity

The 4 GHz upper frequency limit with 0.2 dB insertion loss makes this connector suitable for baseband and low-microwave signal paths where the SMB interface's 50 Ohm controlled impedance and snap-on retention are sufficient — no need for the torque-controlled SMA or N-type threads. The 500-cycle mating rating reflects the gold-on-gold contact interface; the snap-on coupling wears the detent spring over repeated connects, so plan for periodic replacement in high-cycle test applications.

The brass body and centre contact are gold-plated; the PTFE dielectric is pre-loaded in the housing. No crimp tooling required, but the solder joints need a controlled-profile iron or selective wave to avoid melting the PTFE. The snap-on fastening engages with a mating SMB plug; no coupling nut torque spec to track.

MPN
0734042300