Skip to main content
Molex 5052703012

Molex 5052703012 SlimStack Armor, 30 Pos, 0.35mm Pitch

MPN 5052703012
Active

Molex SlimStack Armor 505270 receptacle, 30 positions, 2 rows, 0.014" (0.35mm) pitch, 0.027" (0.68mm) height above board, 0.8mm mated stack height, surface mount, gold contact finish.

$0.3559 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesSlimStack Armor 505270
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5052703012 specifications
ParameterValue
SeriesSlimStack Armor 505270
MountingSurface Mount
Connector typeReceptacle, Center Strip Contacts
Height above board0.027\" (0.68mm)
Mated stacking heights0.8mm
Pitch0.014\" (0.35mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesPick and Place, Solder Retention
Contact finishGold
Rows2
Positions30
Contact finish thickness4.00µin (0.100µm)

Product details

Board Fit and Stack Height for the 0.35mm Pitch Line

The Molex 5052703012 is a 30-position receptacle from the SlimStack Armor 505270 series, designed as a board-to-board mezzanine interconnect. The 0.014" (0.35mm) pitch on a dual-row layout packs 30 circuits into a compact footprint — the tight pitch drives the board layout density, not the current per contact. The mated stacking height is 0.8mm, with the receptacle sitting 0.027" (0.68mm) above the board after reflow. The pick-and-place feature with solder retention means this part reflows on an SMT line without secondary hand work. ROHS3 compliant per the listing.

What the 0.35mm Pitch and 0.8mm Stack Height Mean for Your Board

The 30 positions at this pitch give a linear footprint roughly 5.25mm long per row (30 × 0.35mm / 2 rows, allowing for the centre gap), so the keep-out zone on the board is small but the routing density is high. The gold flash at 4.00µin is a thin plating — adequate for the expected mating cycles in a mezzanine application (typically a single mate during final assembly), but not rated for repeated disconnect-reconnect cycles in a field-service scenario.

MPN
5052703012