Skip to main content
Molex 764101117

Molex Impact 764101117

MPN 764101117
Active

Molex Impact 76410 series, Header Male Pins, 90 positions, 9 rows, 10 columns, Press-Fit termination, Right Angle, Board Edge / Through Hole mount, Gold 30.0µin contact finish, UL94 V-0, Black.

$13.9600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

764101117 specifications
ParameterValue
SeriesImpact 76410
MountingBoard Edge, Through Hole, Right Angle
Connector typeHeader, Male Pins
Voltage rating30V
Operating temperature-55°C ~ 85°C
ColorBlack
Material flammability ratingUL94 V-0
PackageBox
TerminationPress-Fit
Contact finishGold
Rows9
Number of columns10
Positions90
Contact layout, typical30 Differential Pairs
Contact finish thickness30.0µin (0.76µm)

Product details

The Molex 764101117 is a 90-position header, male pins, part of the Impact 76410 series — a high-density backplane interconnect system designed for differential-pair routing. It carries 30 differential pairs across 9 rows and 10 columns, with all positions loaded. The right-angle orientation and press-fit termination suit it for board-edge mounting in a backplane, where the compliant pin is pressed into a plated through-hole without solder, giving a reliable gas-tight joint that can be reworked if needed. The connector style is Impact, meaning it uses a modular column architecture that scales in position count and row configuration across the series.

Press-Fit Termination and Board Layout

The press-fit termination eliminates the soldering step — the compliant pin is pressed into the backplane via a staking press, forming a gas-tight connection. Board layout engineers should note the 9-row, 10-column footprint — the routing density is high, and the press-fit hole pattern must match the backplane stack-up. The 30 differential-pair layout implies a specific signal-ground assignment per column; verify the pinout against the system schematic before committing the BOM line.

The alternate MPN 76410-1117 is a functional equivalent — same 90 positions, 9 rows, press-fit termination, gold plating, and UL94 V-0 rating. Use either order code for the same physical part; the difference is the dash-format vs the full 9-digit code.

MPN
764101117