Skip to main content
TE Connectivity AMP Connectors 1-216093-6

TE AMP-Latch 1-216093-6 DIP Header, 16 Pos IDC

MPN 1-216093-6
Active

TE Connectivity AMP-Latch 1-216093-6, 16-position DIP header, ribbon cable IDC termination, 0.050" cable pitch, 0.100" board pitch, 2 rows, through hole, tin contacts, gray, RoHS.

$3.5800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesAMP-Latch
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-216093-6 specifications
ParameterValue
SeriesAMP-Latch
MountingThrough Hole
Connector typeRibbon Cable, DIP Header
Wire gauge28 AWG, Stranded; 26-30 AWG, Solid
Cable pitch0.050\" (1.27mm)
Cable terminationIDC
ColorGray
PackageBulk
FeaturesFeed Through
Row spacing0.100\" (2.54mm)
Contact finishTin
Rows2
Board-Side pitch0.100\" (2.54mm)
Positions16
Contact finish thickness118.1µin (3.00µm)

Product details

16-Position DIP Header for Ribbon Cable IDC Termination

The TE Connectivity AMP-Latch 1-216093-6 is a 16-position DIP header designed for mass-termination of ribbon cable via IDC (Insulation Displacement Connection). It sits in the AMP-Latch series, a long-running TE family for parallel-board and cable-to-board interconnects where the cable assembly is built with an IDC tool and then mated to the header. The header is through-hole mounted and terminates ribbon cable directly — no crimp terminals, no soldering to the cable. The gray housing includes a feed-through feature, meaning the IDC slot runs the full length of the connector so the cable can pass through and be terminated at either end, or daisy-chained. Wire gauge compatibility covers 28 AWG stranded and 26-30 AWG solid conductors — the IDC slot geometry is tuned for these sizes, so using wire outside the range risks an unreliable termination or damaged contacts.

Board Footprint and Cable Routing

The 0.100" (2.54mm) board-side pitch matches the standard DIP IC footprint, so the header rows sit on 0.100" centers with 0.100" between rows — a 16-position, 2-row layout occupies an 8-pin-per-side footprint. The 0.050" (1.27mm) cable pitch is the industry-standard spacing for 0.050"-pitch ribbon cable, so any 16-conductor 0.050"-pitch ribbon cable with 28 AWG stranded or 26-30 AWG solid conductors will terminate directly into this header. The through-hole mounting is straightforward for wave-solder or hand-solder assembly; no press-fit tooling required.

How It Compares: 1-216093-6 vs 1-216791-6

The closest functional sibling is 1-216791-6, also a 16-position, 2-row AMP-Latch DIP header in gray with tin 118.1µin contacts and the same 0.050" cable / 0.100" board pitch. The difference is mounting: 1-216791-6 adds a press-fit option to the through-hole termination. For a board assembly line already set up for press-fit connectors — no solder, no wave — 1-216791-6 avoids the solder step. For a standard through-hole soldering process, 1-216093-6 is the direct fit. Both are active and RoHS compliant.

MPN
1-216093-6