Skip to main content
TE Connectivity AMP Connectors 1-5207908-0

TE 1-5207908-0 AMPLIMITE HD-20 Backshell, 37 Pos

MPN 1-5207908-0
Active

TE Connectivity AMPLIMITE HD-20 hinged backshell, 37 positions, black plastic, 90°/180° cable exit, 4-40 mating screws, assembly hardware and strain relief included, unshielded, bulk pack.

$13.1200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesAMPLIMITE HD-20
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-5207908-0 specifications
ParameterValue
SeriesAMPLIMITE HD-20
Cable typeRound
Accessory typeHinged Backshell
Cable exit90°, 180°
ColorBlack
MaterialPolypropylene (PP)
Primary materialPlastic
PackageBulk
FeaturesMating Screws 4-40
HardwareAssembly Hardware, Strain Relief
ShieldingUnshielded
Positions37
Compatible D-Sub size37pos and HD62pos
Compatible shell sizeC

Product details

37-Position Hinged Backshell for AMPLIMITE HD-20 D-Subs

The TE Connectivity 1-5207908-0 is a hinged backshell from the AMPLIMITE HD-20 series, designed to fit standard 37-position and high-density 62-position D-sub connectors with a shell size C. It accepts round cable and offers both 90° and 180° cable exit orientations, giving you flexibility in routing the cable bundle away from the connector. The black polypropylene (PP) body is unshielded, so this is a straight mechanical cover and strain-relief piece — not a shielded enclosure for EMI-sensitive lines.

Hardware That Saves a Second Sourcing Trip

This backshell ships with the assembly hardware and a strain relief included, plus 4-40 mating screws. The 4-40 screws are the standard thread for D-sub backshells — they thread into the mating D-sub connector's threaded inserts to lock the assembly together. The strain relief clamps onto the round cable jacket, so the cable's weight and any tugging get transferred to the backshell, not the solder or crimp contacts inside the D-sub. That matters in a panel or enclosure where the cable gets handled after installation.

Unshielded — Know When to Use It

The listing explicitly calls this backshell unshielded. That means it provides mechanical protection and strain relief but no Faraday cage around the D-sub's solder buckets or crimp barrels. If your application runs signals that need EMI shielding — say, near a motor drive or a switching power supply — you need a metal or metallized backshell. For a clean data or control signal in a grounded metal enclosure, the plastic unshielded version is often all you need, and it saves weight and cost.

MPN
1-5207908-0