Skip to main content
TE Connectivity AMP Connectors 1-6116353-3

TE 1-6116353-3 Modular Jack, 8P8C RJ45, Cat5, Shielded

MPN 1-6116353-3
Active

TE Connectivity modular jack, 8P8C (RJ45, Ethernet), Cat5, right-angle through-hole, shielded with EMI finger, dual LED (red/green), gold-plated contacts, tray.

$9.7900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-6116353-3 specifications
ParameterValue
MountingThrough Hole
Connector typeJack
Operating temperature-40°C ~ 85°C
LED colorRed, Green - Red, Green
Contact materialPhosphor Bronze
Housing materialThermoplastic
PackageTray
RatingsCat5
FeaturesBoard Guide
ShieldingShielded, EMI Finger
Orientation90° Angle (Right)
TerminationSolder
Tab directionUp
Contact finishGold
Rows1
Number of ports2
Contact finish thickness50.0µin (1.27µm)
Number of positions (Contacts)8p8c (RJ45, Ethernet)

Product details

The TE Connectivity 1-6116353-3 is a shielded modular jack with 8 positions and 8 contacts — the standard 8P8C footprint for RJ45 Ethernet connections. It is a right-angle, through-hole mounted jack with the tab facing up, designed to sit at the board edge of a network interface card, switch, or industrial Ethernet device. The Cat5 rating means the connector is qualified for 100 MHz signaling, covering 10BASE-T and 100BASE-TX networks, and the shielded shell with integrated EMI fingers bleeds common-mode noise to the chassis ground before it reaches the magnetics. Two LED indicators — one red, one green — are built into the housing, giving the board designer link and activity status visible through the panel cutout without a separate light-pipe assembly.

This jack terminates by solder — the through-hole pins anchor into the PCB and the solder joint carries both the mechanical retention and the electrical connection. The dual-port configuration means a single component handles two Ethernet channels in the same board footprint — useful for dual-NIC designs or daisy-chained industrial devices where every port counts. The EMI finger contacts the chassis ground plane on the PCB, creating a low-impedance path for shield current that would otherwise radiate from the unshielded cable exit.

Sourcing is handled through the independent distribution channel — confirmed pricing and lead time are quoted against an RFQ for the specific BOM quantity.

MPN
1-6116353-3