Skip to main content
TE Connectivity AMP Connectors 163081-2

TE 163081-2 Multimate III+ Stamped Pin, 16-18 AWG, Gold

MPN 163081-2
Active

TE Connectivity Multimate III+ series, 163081-2 stamped signal pin, 16-18 AWG, gold 27.2µin (0.69µm) plating, crimp termination, bulk packaging.

$0.8200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

163081-2 specifications
ParameterValue
TypeSignal, Stamped
SeriesMultimate III+
Wire gauge16-18 AWG
Contact materialBrass
PackageBulk
Pin or socketPin
Contact finishGold
Contact terminationCrimp
Contact finish thickness27.2µin (0.69µm)

Product details

Stamped signal pin for Multimate III+ housings

The TE Connectivity 163081-2 is a stamped and formed signal pin from the Multimate III+ series, designed for crimp termination to 16-18 AWG wire. It carries a gold contact finish at 27.2µin (0.69µm) thickness — enough plating for repeated mating cycles in field-service or industrial control cabinets where the connector sees periodic disconnect and reconnect. The brass base material gives good spring properties for the crimp barrel, and the stamped construction keeps the per-contact cost down compared to a machined pin. This is the male half of the contact pair; it mates with the corresponding Multimate III+ socket contact inside the housing cavity.

Wire gauge and crimp termination

The 16-18 AWG wire range covers common control and signal cable sizes used in panel wiring and harness assemblies. Crimp termination requires the correct tool and die set — the stamped barrel needs a full crimp height to meet pull-force specs. The contact is supplied loose in bulk packaging, so it is loaded into the housing one at a time with a hand or automated crimp tool. For a typical Multimate III+ housing, the pin seats into the cavity until the retention lance locks; a secondary lock or TPA (terminal position assurance) may be used depending on the housing variant.

Active production — sourced per RFQ

The 163081-2 is listed as Active in production status. No official successor or cross-reference is on record; the closest sibling in the series is the 163082-2, which is the socket counterpart for the same wire gauge. For volume BOM commitments, confirm the mating housing part number and cavity count before placing the order.

MPN
163081-2