Skip to main content
TE Connectivity AMP Connectors 2008552-3

TE Connectivity 2008552-3 Terminal Block, 3 Position

MPN 2008552-3
Active

TE Connectivity 2008552-3 terminal block, 3 positions, 0.323" (8.20mm) pitch, 2 A, 600 V, through-hole, push-in spring termination, gray PBT housing.

$0.8600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2008552-3 specifications
ParameterValue
MountingThrough Hole
Voltage600 V
Current2 A
Wire gauge18 AWG
Wire terminationScrewless - Leg Spring, Push-In Spring
Operating temperature-40°C ~ 105°C
ColorGray
Housing materialPolybutylene Terephthalate (PBT)
Contact material - platingPhosphor Bronze - Tin Plated
Pitch0.323\" (8.20mm)
PackageBulk
Number of levels1
Mating orientationVertical with Board
Positions per level3

Product details

The gray PBT housing carries a 600 V rating and a 2 A per-circuit current limit, which together place it in the signal-level or low-power control wiring class, not main power distribution. The 18 AWG wire gauge acceptance matches typical field-wiring practice for industrial sensors, relays, and PLC I/O modules.

The screwless leg spring, push-in termination means no screwdriver torque, no stripped threads, and no re-torque on the line. For a contract manufacturer, that translates to faster cycle time per termination and fewer operator-dependent variables. The trade-off: push-in spring blocks work best with solid wire or ferruled stranded wire — fine-stranded wire without a ferrule can collapse under the spring force. The 18 AWG entry is a single-wire-per-position design; there is no wire comb or jumper bar provision in this listing, so each position terminates independently.

Board Fit and Layout Considerations

At 8.20 mm pitch, this block occupies three positions across the board. The through-hole mounting requires plated holes sized for the pin diameter; the vertical orientation means the wire entry axis is perpendicular to the board, so the mating connector or wire bundle must have clearance above the PCB surface.

MPN
2008552-3