Skip to main content
TE Connectivity AMP Connectors 282885-2

TE Connectivity 282885-2 Buchanan Terminal Block, 2 Position

MPN 282885-2
Active

TE Connectivity Buchanan series, 2-position PCB terminal block, 5.08 mm pitch, screw cage clamp termination, 13.5 A, 300 V, through-hole, green housing.

$1.4000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

282885-2 specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current13.5 A
Wire gauge12-30 AWG
Wire terminationScrew - Rising Cage Clamp
ColorGreen
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated
Pitch0.200\" (5.08mm)
PackageBulk
FeaturesHigh Wire Entry Level, Interlocking (Side)
Screw threadM3
Number of levels1
Mating orientationHorizontal with Board
Positions per level2

Product details

The 5.08 mm pitch matches the standard 0.200-inch grid, so the footprint aligns with common PCB layout rules for power distribution and industrial control boards. The green polyamide 6/6 housing carries a single level of terminals, with the wire entry oriented horizontally to the board — a side-entry arrangement that keeps the wiring parallel to the PCB surface. Rated 13.5 A at 300 V, the block handles moderate power loads — think relay outputs, sensor supply rails, or field-wired I/O terminations inside an industrial cabinet. The 12-30 AWG wire range means it accepts both 12 AWG motor leads and 30 AWG signal pairs in the same clamp, which simplifies BOM consolidation for mixed-gauge harnesses.

Termination and Wiring Detail

The rising cage clamp mechanism pulls the clamping plate up against the wire as the M3 screw is tightened, creating a gas-tight connection on solid or stranded conductors. The clamp and screw are both brass with nickel plating — the nickel layer resists corrosion in humid panel environments better than bare brass. The contact pads on the PCB side are brass with tin plating, which mates well with HASL or ENIG board finishes without galvanic mismatch. The side interlocking feature lets you snap multiple 282885-2 blocks together into a multi-position assembly without a separate end bracket.

No direct cross-reference or drop-in alternative is listed on the TE Connectivity public record; the Buchanan series includes multiple pitch and position variants, but a 2-position 5.08 mm green block with side-entry and cage clamp is specific to this order code.

MPN
282885-2