Skip to main content
TE Connectivity AMP Connectors 284093-6

TE Buchanan 284093-6 Terminal Block, 6 Pos, 5 mm, 13.5 A

MPN 284093-6
Active

TE Connectivity Buchanan 284093-6, 6-position terminal block, 0.197" (5.00 mm) pitch, 13.5 A, 300 V, through-hole, screw rising cage clamp, green housing.

$2.0300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

284093-6 key specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current13.5 A
Wire gauge16-30 AWG
Wire terminationScrew - Rising Cage Clamp
ColorGreen
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated
Pitch0.197\" (5.00mm)

All specifications

284093-6 additional specifications
ParameterValue
PackageBulk
FeaturesInterlocking (Side)
Screw threadM3
Torque - screw0.68 Nm (6 Lb-In)
Number of levels1
Mating orientationVertical with Board
Positions per level6

Product details

The TE Connectivity Buchanan 284093-6 is a 6-position, single-level PCB-mount terminal block on 0.197" (5.00 mm) pitch. It uses a screw-actuated rising cage clamp to terminate 16-30 AWG wire — the clamp pulls the wire up against a brass, tin-plated contact bar, giving a gas-tight connection without damaging the conductor strands. The green polyamide (PA66) housing carries a 13.5 A / 300 V rating, which is the full current capacity of the clamp and contact system at the rated temperature rise. This is the standard Buchanan footprint for a 5 mm-pitch block, used in industrial control panels, HVAC controllers, power supplies, and any board-level power distribution where a field-serviceable screw termination is preferred over a crimp or IDC.

Termination and Torque

Wire termination is a rising cage clamp driven by an M3 brass, nickel-plated screw. The specified torque is 0.68 Nm (6 Lb-In) — that's the setting for the screwdriver, not a suggestion. Under-torque leaves the wire loose in the cage; over-torque strips the M3 thread in the PA66 housing. The clamp material is brass with nickel plating, which resists corrosion in cabinet environments where condensation cycles on and off. The interlocking side feature lets you gang multiple blocks side-by-side on the same rail without gaps, maintaining the 5.00 mm pitch across a multi-position assembly.

MPN
284093-6