Skip to main content
TE Connectivity AMP Connectors 284414-7

TE Connectivity 284414-7 Buchanan Terminal Block, 7 Pos

MPN 284414-7
Active

TE Connectivity Buchanan 284414-7, 7-position PCB terminal block, 3.50mm pitch, 12 A, 300 V, green, screw rising cage clamp, through-hole, 1 level.

$4.3000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

284414-7 key specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current12 A
Wire gauge12-30 AWG
Wire terminationScrew - Rising Cage Clamp
ColorGreen
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated
Pitch0.138\" (3.50mm)

All specifications

284414-7 additional specifications
ParameterValue
PackageBulk
FeaturesInterlocking (Side)
Screw threadM3
Torque - screw0.25 Nm (2.2 Lb-In)
Number of levels1
Mating orientationVertical with Board
Positions per level7

Product details

7-Position PCB Terminal Block, 3.50 mm Pitch, 12 A — Panel Wiring Fit

The TE Connectivity Buchanan 284414-7 is a 7-position, single-level PCB terminal block with a 3.50 mm pitch, designed for top-entry wire termination via a screw-actuated rising cage clamp. The green polyamide (PA66) housing is standard for ground/earth identification in panel wiring, and the 12 A / 300 V rating suits power distribution and control circuits inside industrial enclosures. The M3 screw with a specified torque of 0.25 Nm (2.2 Lb-In) ensures consistent clamping force across the 12-30 AWG wire range, and the side interlocking feature lets multiple blocks snap together for multi-circuit bus bars without extra brackets.

The rising cage clamp termination pulls the wire into a brass-nickel plated clamp, creating a gas-tight joint that resists vibration loosening better than a simple screw-and-pad design. The 0.25 Nm (2.2 Lb-In) torque spec is not a suggestion — under-tightening leaves the wire loose, over-tightening can strip the M3 brass screw or crack the PA66 housing. The 12-30 AWG range means this block accepts both 12 AWG power feeds (for the full 12 A) and 30 AWG signal wiring, but the clamp geometry is optimised for the larger gauges; 30 AWG needs careful stripping and insertion to ensure the cage grips the conductor.

MPN
284414-7