Skip to main content
TE Connectivity AMP Connectors 487576-4

487576-4 TE Connectivity AMPMODU FFC Connector, 12 Pos

MPN 487576-4
Active

TE Connectivity AMPMODU 487576-4, FFC vertical connector, 12 positions, 0.050" (1.27mm) pitch, ZIF actuation with slide lock, through-hole solder termination, tin-plated phosphor bronze contacts, rated 1A at 150V, -55°C to 105°C.

$3.5100 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesAMPMODU
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

487576-4 key specifications
ParameterValue
SeriesAMPMODU
MountingThrough Hole
Cable end typeStraight
Flat flex typeFFC
Connector (Contact type)Contacts, Vertical - 1 Sided
Voltage rating150V
Current rating1A
Operating temperature-55°C~105°C
Housing colorBlack
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialThermoplastic

All specifications

487576-4 additional specifications
ParameterValue
Actuator materialThermoplastic
Height above board0.310\" (7.87mm)
Pitch0.050\" (1.27mm)
PackageTube
FeaturesZero Insertion Force (ZIF)
TerminationSolder
Contact finishTin
Locking featureSlide Lock
FFC, FCB thickness0.10mm ~ 0.31mm
Positions12
Contact finish thickness150.0µin (3.81µm)

Product details

The 487576-4: Vertical through-hole mounting with a height above board of 0.310" (7.87mm) — the connector sits upright, so the FFC enters straight, and the z-height is low enough for most card-edge or mezzanine layouts.

ZIF Actuation and FFC Retention

Zero Insertion Force (ZIF) with a slide lock — the actuator opens the contact beams so the FFC slides in without scraping the pads, then the slide lock closes to clamp the flex. This avoids contact wear during assembly and field rework. Accepts FFC thickness from 0.10mm to 0.31mm — the beam compliance covers standard 0.3mm flex circuits and thinner 0.1mm ribbon cable, so the same connector works across different flex stack-ups.

Contact Interface and Environmental Range

For high-cycle or outdoor duty, a gold-plated sibling would be the better call.

ROHS3 compliant — meets the latest EU restriction directive for lead and other substances, so it passes compliance review without exemption paperwork.

MPN
487576-4