Skip to main content
TE Connectivity AMP Connectors 5767061-1

TE MICTOR 5767061-1, 38-pos Receptacle, 0.025" Pitch

MPN 5767061-1
Active

TE Connectivity MICTOR receptacle, 5767061-1, 38 positions, 0.025" (0.64mm) pitch, 2 rows, surface mount, palladium-nickel contacts, board guide and ground bus.

$21.5700 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesMICTOR
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5767061-1 specifications
ParameterValue
SeriesMICTOR
MountingSurface Mount
Connector typeReceptacle, Center Strip Contacts
Height above board0.236\" (6.00mm)
Mated stacking heights6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, 22.86mm
Pitch0.025\" (0.64mm)
PackageTube
FeaturesBoard Guide, Ground Bus (Plane)
Contact finishPalladium-Nickel
Rows2
Positions38
Contact finish thickness30.0µin (0.76µm)

Product details

MICTOR 38-Position Receptacle — High-Density Mezzanine Interconnect

The TE Connectivity MICTOR 5767061-1 is a 38-position receptacle with center strip contacts, designed for high-density board-to-board mezzanine stacking. The dual-row arrangement with palladium-nickel contacts (30.0µin gold flash) is specified for repeated mating cycles in backplane and midplane applications where signal integrity and mechanical durability are both on the line. This is not a general-purpose header — it is a precision interconnect for systems where the signal layer count and board stack-up are already locked in.

Stacking Heights and Board Fit

The 5767061-1 supports eight mated stacking heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, and 22.86mm. That range covers everything from tight mezzanine card spacing to taller daughtercard offsets. The 0.236" (6.00mm) height above board means the receptacle sits low on the PCB, leaving the mating plug to carry the stack-up tolerance. Surface-mount termination keeps the assembly reflow-compatible, though the fine pitch demands a solder paste stencil designed for 0.64mm pad spacing.

The palladium-nickel underlayer resists fretting corrosion better than nickel alone, and the gold flash keeps contact resistance low through the first several hundred cycles. This is the right finish for a backplane connector that sees periodic card swaps — not for a one-time harness install.

No last-time-buy or phase-out notice. The base product number 5767061 covers the family; this variant is the 38-position, tube-packaged version.

MPN
5767061-1