Skip to main content
Amphenol 034-1139-12G

034-1139-12G HD-BNC Jack, 75 Ohm, 18 GHz, Gold Body

MPN 034-1139-12G
Active

Amphenol 034-1139-12G HD-BNC™ jack, 75 Ohm, 18 GHz, panel mount bulkhead, gold body, bayonet lock, 500 mating cycles.

$11.8200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

034-1139-12G key specifications
ParameterValue
SeriesHD-BNC™
MountingPanel Mount, Through Hole
Connector typeJack, Female Socket
Fastening typeBayonet Lock
Frequency - max18 GHz
Mounting featureBulkhead - Front Side Nut
Operating temperature-40°C ~ 85°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBag

All specifications

034-1139-12G additional specifications
ParameterValue
FeaturesIsolated
Impedance75 Ohms
Body finishGold
Mating cycles500
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

75 Ohm HD-BNC Jack for 18 GHz Signal Paths

The Amphenol 034-1139-12G is a 75 Ohm HD-BNC™ jack, female socket, designed for signal paths that push past the 4 GHz ceiling of standard BNC. Rated to 18 GHz, this bulkhead-mount connector uses a bayonet lock and isolated construction to maintain impedance through the panel interface.

Impedance and Frequency — What the 75 Ohm and 18 GHz Ratings Mean

The 75 Ohm impedance targets video distribution, broadband CATV, and high-resolution imaging systems — not the 50 Ohm world of RF test gear. Mating a 75 Ohm jack into a 50 Ohm line creates a 1.5:1 VSWR bump that degrades return loss at higher frequencies. The 18 GHz maximum frequency is the upper bound of the HD-BNC interface; standard BNC typically rolls off around 4 GHz. For a 3 GHz HD-SDI signal this connector has headroom well beyond the fundamental.

Mounting and Termination — Bulkhead Fit and Solder Connection

Panel mount with a front-side nut through a bulkhead hole, secured by the through-hole solder posts. The shield termination is solder, as is the centre contact — no crimp tooling required. The isolated feature means the connector body is electrically separated from the panel ground, useful where ground loops must be broken.

MPN
034-1139-12G