Skip to main content
Amphenol 112512

Amphenol RF 112512 BNC Plug, 50 Ohm, 4 GHz, Bayonet Lock

MPN 112512
Active

Amphenol RF BNC plug, male pin, 50 Ohm, 4 GHz, bayonet lock, crimp/solder termination, for RG-179/188/316, includes 5 pcs.

$3.9400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

112512 key specifications
ParameterValue
MountingFree Hanging (In-Line)
Connector typePlug, Male Pin
Fastening typeBayonet Lock
Voltage rating500 V
Frequency - max4 GHz
Cable groupRG-179, 188, 316 Double Braid, M17/152-RD316
Operating temperature-65°C ~ 165°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass
PackageBag

All specifications

112512 additional specifications
ParameterValue
Includes5 pcs - 1 Connector, 1 Contact, 1 Ferrule, 1 Gasket, 1 Sleeve
Impedance50 Ohms
Body finishNickel
Mating cycles500
Insertion loss0.2dB
Number of ports1
Shield terminationCrimp
Contact terminationCrimp or Solder
Center contact platingGold

Product details

What This BNC Plug Carries and Where It Fits

The 112512: It operates at 50 Ohms nominal impedance, with a frequency ceiling of 4 GHz — the practical limit for a standard BNC interface before the mode-free bandwidth drops off. The kit includes five pieces per bag: the connector body, a centre contact, a ferrule, a gasket, and a sleeve — everything needed to terminate one cable end except the crimp tool. The contact can be crimped or soldered; the shield termination is crimp-only via the ferrule.

Cable Groups and Termination Fit

This plug is dimensioned for RG-179, RG-316 double-braid cables, and the M17/152-RD316 variant. The ferrule and centre-contact bore are sized for the dielectric diameter and braid coverage of those cables.

MPN
112512