Skip to main content
Molex 0559090474

Molex 0559090474 SlimStack Plug, 40 Pos, 0.40mm Pitch

MPN 0559090474
Active

Molex SlimStack 55909 series, Plug Outer Shroud Contacts, 40 positions, 2 rows, 0.016" (0.40mm) pitch, Surface Mount, Gold 8.00µin, 1.5mm mated stacking height, Solder Retention.

$3.1600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesSlimStack 55909
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

0559090474 specifications
ParameterValue
SeriesSlimStack 55909
MountingSurface Mount
Connector typePlug, Outer Shroud Contacts
Height above board0.045\" (1.14mm)
Mated stacking heights1.5mm
Pitch0.016\" (0.40mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention
Contact finishGold
Rows2
Positions40
Contact finish thickness8.00µin (0.203µm)

Product details

The Molex 0559090474 is a 40-position plug from the SlimStack 55909 series, designed as the board-to-board mezzanine interconnect for compact portable devices. The mated stack height lands at 1.5mm — a specific z-height that suits thin enclosures where the board pair sits close together. The solder retention feature anchors the plug to the board during reflow, preventing the part from floating off the pads as the paste wets out. This is a surface-mount plug with outer shroud contacts, meaning the mating receptacle slides inside the shroud for alignment.

The 1.5mm mated stacking height is the single dimension that governs the mechanical fit in a mezzanine stack-up. It defines the z-height from the bottom of the plug board to the top of the receptacle board. If the enclosure has a 2.0mm gap allowance, this connector fits with 0.5mm clearance above the top board. If the gap is 1.2mm, it does not fit — no shimming, no spacer. The 0.40mm pitch drives the routing density on the board. Each signal pair occupies 0.80mm center-to-center across two rows, which forces fine-line PCB traces — typically 0.15mm line/space or tighter — between the pads. A standard 0.50mm pitch connector would use wider traces, so swapping this part into an existing layout without re-spinning the board is not possible.

MPN
0559090474