Skip to main content
Molex 0733660010

Molex 73366 0733660010 MCX Plug, 50 Ohm, 6 GHz

MPN 0733660010
Active

Molex 73366 Series MCX plug, 50 Ohm, male pin, right-angle free-hanging, for RG-174/188/316 cable, 6 GHz max, 335 V, 500 mating cycles, gold-plated center contact, bulk.

$3.9900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

0733660010 key specifications
ParameterValue
Series73366
MountingFree Hanging (In-Line), Right Angle
Connector typePlug, Male Pin
Fastening typeSnap-On
Voltage rating335 V
Frequency - max6 GHz
Cable groupRG-174, 188, 316
Operating temperature-55°C ~ 155°C
Body materialZinc Alloy
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass

All specifications

0733660010 additional specifications
ParameterValue
Includes3 pcs - 1 Connector, 1 End Cap, 1 Ferrule
Impedance50 Ohms
PackageBulk
Body finishNickel
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

The Molex 0733660010 is an MCX plug, male pin, in the 73366 series — a right-angle, free-hanging (in-line) connector built for thin coax cable groups RG-174, RG-188, and RG-316. It ships as a 3-piece kit: the connector body, an end cap, and a ferrule, so you have everything to terminate one cable end in a single order.

The 6 GHz max frequency puts this MCX plug comfortably into the sub-6 GHz band used by Wi-Fi, cellular, and GPS — it's not a millimeter-wave connector, but it covers the common RF bands without the bulk of an SMA. The 500 mating cycles are typical for a snap-on MCX interface; the gold-plated brass center contact handles the wear, so the plug survives repeated connects in test jigs or field-swapped modules. The -55°C to 155°C operating range means it lives in outdoor enclosures and engine compartments without the dielectric shifting.

Cable termination and shield

The center contact is solder-terminated — you tin the coax center conductor and flow solder into the pin. The shield is crimped through the ferrule, which gives a gas-tight mechanical bond to the zinc alloy body with nickel finish. The PTFE dielectric inside keeps the impedance stable through the termination zone. For a clean field termination, use the correct crimp die for the cable diameter; the ferrule is sized for the RG-174/188/316 jacket OD.

MPN
0733660010