Skip to main content
Molex 0950097667

Molex 0950097667 RJ45 Jack, 6P6C, Cat3, R/A, Through Hole

MPN 0950097667
Active

Molex 95009 series modular jack, 6P6C (RJ11/RJ12/RJ14/RJ25), right-angle through-hole, unshielded, gold 50.0µin contacts, Cat3 rated, board lock, -40°C to 85°C, tray.

$1.3600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Series95009
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

0950097667 key specifications
ParameterValue
Series95009
MountingThrough Hole
Connector typeJack
Operating temperature-40°C ~ 85°C
LED colorDoes Not Contain LED
Contact materialCopper Alloy
Housing materialPolyester, Glass Filled
PackageTray
RatingsCat3
FeaturesBoard Lock
ShieldingUnshielded
Orientation90° Angle (Right)

All specifications

0950097667 additional specifications
ParameterValue
TerminationSolder
Tab directionDown
Contact finishGold
Rows1
Number of ports1
Contact finish thickness50.0µin (1.27µm)
Number of positions (Contacts)6p6c (RJ11, RJ12, RJ14, RJ25)

Product details

The Molex 0950097667 is a 6-position, 6-contact (6P6C) modular jack from the 95009 series, wired for RJ11, RJ12, RJ14, and RJ25 pinouts. It is a right-angle, through-hole connector rated Category 3 — meaning it handles voice and 10BASE-T Ethernet but not 100BASE-TX or faster data rates. The unshielded housing and gold-plated contacts (50.0µin / 1.27µm) suit it for indoor telecom equipment, PBX systems, and point-of-sale terminals where the cabling run stays under 100 metres and the environment is dry.

Why the 50.0µin Gold Matters

The contact finish thickness — 50.0µin (1.27µm) gold over the copper alloy base — is heavier than the 15–30µin flash found on consumer-grade jacks. That extra gold buys more mating cycles before the base metal shows through, which matters if this jack lives in a field-service panel or a test fixture where the plug gets inserted and removed dozens of times over the product life. The board lock complements this by holding the connector body down through wave solder so the jack does not lift off the board when the cable is yanked.

Right-Angle Through-Hole — What the Board Layout Needs

The 90° right-angle orientation with through-hole solder tails is the standard footprint for a PCB-edge RJ jack. The single-row, single-port layout keeps the keep-out zone narrow — useful when you are packing multiple jacks side by side on a line card. The housing is a glass-filled polyester, which holds up to wave solder temperatures without warping.

It is ROHS3 Compliant and carries a Category 3 rating.

MPN
0950097667