Skip to main content
TE Connectivity AMP Connectors 1-747150-4

TE AMPLIMITE HD-20 1-747150-4, D-Sub Receptacle 9-Pos, 6A

MPN 1-747150-4
Active

TE Connectivity AMPLIMITE HD-20 D-Sub receptacle, 1-747150-4, 9 positions, 2 rows, vertical through-hole solder termination, 6A, 125V, gold-plated phosphor bronze contacts, female screwlock flange, black polyester shell.

$8.5100 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS non-compliant
IncotermsDAP / DDP Available
SeriesAMPLIMITE HD-20
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-747150-4 key specifications
ParameterValue
SeriesAMPLIMITE HD-20
TypeSignal
MountingThrough Hole
Connector typeReceptacle, Female Sockets
Voltage rating125V
Current rating6A
Shell size, connector layout1 (DE, E)
Operating temperature-55°C ~ 105°C
ColorBlack
Contact materialPhosphor Bronze
Dielectric materialPolyester
Shell material, finishSteel, Tin Plated

All specifications

1-747150-4 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
PackageBulk
TerminationSolder
Contact finishGold
Flange featureMating Side, Female Screwlock (4-40)
Rows2
Positions9
Contact finish thickness30.0µin (0.76µm)

Product details

The TE Connectivity AMPLIMITE HD-20 1-747150-4 is a 9-position D-Sub receptacle with female sockets arranged in two rows. It terminates via through-hole solder pins to the PCB and mates with the standard DE-9 (E shell size) male plug.

Sizing the Connection: Current and Voltage

Rated 6A per contact at 125V, this receptacle carries signal-level and low-power loads — think I/O lines, serial interfaces, or control signals, not a bus bar.

Mounting and Mating Hardware

The mating-side female screwlock (4-40) is the standard retention for vibration-resistant D-sub connections; the jack-screws on the mating plug thread into this flange to prevent the pair from backing off under cable strain or machine vibration. Build-to-print needs both halves: this receptacle plus the mating DE-9 male plug with 4-40 male screwlocks.

MPN
1-747150-4