Skip to main content
TE Connectivity AMP Connectors 100147-1

TE Connectivity 100147-1 Z-PACK Receptacle, 110 Pos

MPN 100147-1
Active

TE Connectivity Z-PACK receptacle, 110 positions, 5 rows, 0.079" (2.00mm) pitch, press-fit, right-angle, gold 30.0µin, 1.5A, 500Vrms.

$13.8500 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS non-compliant
IncotermsDAP / DDP Available
SeriesZ-PACK
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

100147-1 specifications
ParameterValue
SeriesZ-PACK
MountingBoard Edge, Through Hole, Right Angle
Connector typeA 22
Voltage rating500Vrms
Current rating1.5 A
Operating temperature-55°C ~ 125°C
Pitch0.079\" (2.00mm)
PackageTube
TerminationPress-Fit
Contact finishGold
Rows5
Positions110
Contact finish thickness30.0µin (0.76µm)

Product details

What This 110-Position Backplane Receptacle Does

The TE Connectivity 100147-1 is a 110-position receptacle from the Z-PACK series, built for dense backplane interconnects where you need to pack a lot of signal lines into a board-edge footprint. The 0.079" (2.00mm) pitch keeps routing manageable — tight enough for 110 circuits across 5 rows, but not so fine that you need micro-via layers to escape the footprint. Each contact is rated 1.5 A, which is typical for a high-density signal connector at this pitch; the 500Vrms voltage rating is higher than you'd expect for 2.00mm pitch, so the housing creepage distances are generous for the class. The press-fit termination is the key differentiator here — no solder means no wave solder defects, no flux residues, and the connector can be pressed into plated through-holes on a backplane in one operation. The connector style is listed as A 22, which is a Z-PACK keying variant — the mating pin header must match this keying code to avoid cross-mating with other Z-PACK connectors on the same backplane.

This is a receptacle (female sockets), so it mates with a Z-PACK pin header (male pins) of the same 110-position count, 5-row layout, and A 22 keying. The press-fit tails go into 0.040" (1.02mm) plated through-holes on the backplane — the hole size and finished plating thickness matter for the press-in force, so use TE's recommended PCB layout from the product drawing.

MPN
100147-1