Skip to main content
TE Connectivity AMP Connectors 1473562-3

TE Connectivity 1473562-3 RITS Plug, 3 Pos IDC, 2.00mm Pitch

MPN 1473562-3
Active

TE Connectivity RITS series plug, 3 positions, 1 row, 0.079" (2.00mm) pitch, IDC termination, male pin, gold 8.00µin contacts, free hanging, latch lock, black.

$3.5100 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesRITS
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1473562-3 specifications
ParameterValue
SeriesRITS
Wire typeDiscrete
TypeMale Pin
MountingFree Hanging (In-Line)
Connector typePlug
Fastening typeLatch Lock
Cable terminationIDC
ColorBlack
Pitch0.079\" (2.00mm)
PackageBulk
Contact finishGold
Rows1
Positions3
Contact finish thickness8.00µin (0.203µm)

Product details

TE RITS 1473562-3 — 3-Position IDC Plug for Discrete Wire Harnesses

For the board layout engineer, this dictates the pad pattern on the mating header — a 2.00 mm pitch footprint is tighter than the more common 2.54 mm (0.100") pitch, so routing density between pads is higher. The plug accepts discrete wires (not ribbon cable), which is typical for point-to-point harnesses where each wire runs to a different destination.

3 Positions — Matching the BOM Line

Gold Contacts and Latch Lock — Signal-Duty Retention

The latch lock engages audibly when the plug is fully seated into the mating header, providing a tactile confirmation of full mate. For a field-service technician, this latch means the connector will not back out under cable strain or moderate vibration, though it is not a secondary lock — the primary retention is the latch itself.

Free-Hanging Mount — Inline Cable Termination

The plug is free-hanging (in-line), meaning it terminates the end of a cable assembly and mates to a panel-mount or board-mount header. There are no mounting ears or flanges — the connector floats on the wire. This is standard for internal wiring where the connector is not subject to repeated plug/unplug cycles under load.

MPN
1473562-3